NETGEAR VEVG2660-1TKSAS - Edit a Static Route; Delete a Static Route

Specify Network Settings
74
VDSL Voice Gateway
11. Type the gateway IP address, which must be a gateway on the same LAN segment as the
gateway.
12. Type a number from 1 through 15 as the metric value.
This value represents the number of gateways between your network and the destination.
Usually, a setting of 2 or 3 works, but if this link is a direct connection, set it to 1.
13. Click the Apply button.
The route is added to the table on the Static Routes screen.
Edit a Static Route
 To edit a static route:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes screen displays.
5. In the table, select the radio button next to the route that you want to edit.
6. Click the Edit button.
The Static Routes screen adjusts.
7. Edit the route information.
8. Click the Apply button.
Your changes are saved.
Delete a Static Route
 To delete a static route:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the gateway user name and password.