NETGEAR VEVG2660-1TKSAS - Edit a Network Folder on a USB Drive; Approve USB Devices

Share a USB Drive Attached to the Gateway
49
VDSL Voice Gateway
The user name (account name) for All – no password is guest. The password for admin is
the same one that is used to log in to the gateway. By default, it is password.
10. Click the Apply button.
The folder is added on the USB device.
Edit a Network Folder on a USB Drive
You can edit network folders on the USB storage device.
 To edit a network folder:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The default password is admin. The user name and password
are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > ReadySHARE.
The Available Network Folders list displays.
5. Click the Edit button.
The Edit Network Folder screen displays.
6. Change the settings as needed:
• In the Share Name field, edit the name of the share.
• In the Read Access list and the Write Access list, select the settings that you want.
The user name (account name) for All – no password is guest. The password for
admin is the same one that is used to log in to the gateway. By default, it is password.
7. Click the Apply button.
Your changes are saved.
Approve USB Devices
For more security, you can set up the gateway to share only USB devices that you approve.
 To approve USB devices:
1. Launch a web browser from a computer or wireless device that is connected to the
network.