Specify Network Settings
54
VDSL Voice Gateway
View or Change the WAN Settings
You can view the wide area network (WAN) settings for the Internet port. You can set up a
DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable
the gateway to respond to a ping to its WAN (Internet) port.
To view or change the WAN settings:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The
default password is admin. The user name and password
are case-sensitive.
The BASIC Home screen displays.
4. Select
ADVANCED > Setup > WAN Setup.
5. V
iew or change the following settings:
• Enable PPPoE Relay
. Allow a PPPoE client on a local computer to connect to a
remote PPPoE server with the gateway acting as a relay agent.
• W
AN Preference. By default, this is set to Auto-Detect, but you can specify Must
use DSL WAN or Must use Ethernet WAN.
• Disable Port Scan and DoS Protection. DoS protection protects your LAN against
denial of service attacks such as Syn flood, Smurf
Attack, Ping of Death, and many
others. Select this check box only in special circumstances.
To Next Page
Loading...
