NETGEAR VEVG2660-1TKSAS - Set up a Default DMZ Server; Change the Gateways Device Name

Specify Network Settings
56
VDSL Voice Gateway
gateway forward the traffic to one computer on your network. This computer is called the
default DMZ server.
Set Up a Default DMZ Server
 To set up a default DMZ server:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The default password is admin. The user name and password
are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > WAN Setup.
5. Select the Default DMZ Server check box.
6. Type the IP address.
7. Click the Apply button.
Your change takes effect.
Change the Gateway’s Device Name
The gateway’s device name is VEVG2660-1TKSAS. This device name displays in a file
manager when you browse your network.
 To change the gateway’s device name:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The default password is admin. The user name and password
are case-sensitive.
The BASIC Home screen displays.