NETGEAR VEVG2660-1TKSAS - Page 17

Internet Setup
17
VDSL Voice Gateway
5. Click the Next button.
6. In the Internet Connection Mode drop-down list, select one of the following:
• Use DSL connection first and if fail 3G Mobile Broadband connection
• Always use Mobile Broadband connection
• Always use DSL connection
7. Click the Next button.
8. In the Select Country list, select your country
.
9. Leave the Ye
s radio button selected and click the Next button.
A connection detection progress screen displays. When the gateway detects the
connection, more screens display
.
10. When prompted, select your Internet service provider.
11. If your ISP requires login credentials, enter your user name and password and click the Next
button.
The Setup Wizard detects the connection type and displays relevant prompts.
12. Complete the fields for your connection type:
• For a PPPoE or PPoA connection, type the user name and password.
Both are case-sensitive.
• For IP over
ATM Classical IP assignment (RFC1577), enter the assigned IP address,
the subnet mask, and the IP address of the primary DNS server for your ISP.
DNS servers translate an Internet name such as www.netgear.com to a numeric IP
address.
13. Click the T
est button.
The Setup Wizard checks your Internet connection.
Note: If you have trouble connecting to the Internet, see Chapter 10,
Troubleshooting, for help.
14. After the test succeeds, click the Apply button.
Your settings are saved.