Internet Setup
21
VDSL Voice Gateway
To specify the DSL settings:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The
default password is admin. The user name and password
are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Setup > DSL Settings.
5. If your ISP provided you with a modulation, multiplexing method, or VPI and VCI numbers,
enter the settings.
Otherwise, the default settings are adequate.
6. In the Multiplexing Method drop-down list, select LLC-based or VC-based.
7. In the VPI field, type a number from 0 through 255.
The default is 8.
8. In the VCI field, type a number from 32 through 65535.
The default is 35.
9. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
