Initial Setup
22
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Note: For information about how to configure advanced wireless settings,
see Configure Advanced Wireless Settings on page 78.
Configure 802.11a/a-na-ac Wireless Settings
To configure the 802.11a/a-na-ac wireless settings:
1. Select Configuration > Wireless > Basic > Wireless Settings.
2. Select the wireless mode in the 5 GHz band:
• 11a. 802.11n-compliant devices can connect to the access point because they are
backward compatible.
• 11a-na-ac. This is the default setting. If you keep the default setting, go to Step 5.
When you change the wireless mode, the Turn Radio On check box is automatically
cleared, and all fields, buttons, and menus on the page are masked out.
3. Turn on the radio by selecting the Turn Radio On check box.
A pop-up window opens.
Note: Under normal conditions, you want the radio to be turned on. Turning
off the radio disables access through the wireless access point, which
can be helpful for configuration, network tuning, or troubleshooting
activities.
To Next Page
Loading...
