NETGEAR WGT624 v4 User Manual

Super G Wireless Router WGT624 v4 User Manual
Configuring Internet Connectivity 1-11
v1.0, July 2008
11. Make sure that the Turn Access Control On check box is not selected.
12. Configure and test your wireless computer for wireless connectivity.
Program the wireless adapter of your computer to have the same SSID and channel that you
specified in the router, and disable encryption. Check that your computer has a wireless link
and can obtain an IP address by DHCP from the router
Once your computer has basic wireless connectivity to the router, you can configure the
advanced wireless security functions of the computer and router (for more information about
security, see Chapter 2, “Wireless Security”).

NETGEAR WGT624 v4 Specifications

General

Wireless Standard	802.11g
Frequency Band	2.4 GHz
LAN Ports	4 x 10/100 Mbps
WAN Port	1 x 10/100 Mbps
Security	WEP, WPA, WPA2
Wireless Data Rates	Up to 54 Mbps
VPN Pass-through	Yes
Antenna	2 x external
Interface	Ethernet
Firewall	NAT, SPI
Weight	0.66 lbs