Super G Wireless Router WGT624 v4 User Manual
5-6 Advanced Configuration
v1.0, July 2008
3. Select the service type (TCP or UDP) from the Service Type drop-down list.
4. Enter the outbound port number in the Triggering Port field.
5. Enter the inbound connection port information:
a. Connection type (TCP/UDP, TCP, or UDP)
b. Starting port
c. Ending port
For inbound connection information, see the game or applications manual or the product’s
support website.
Editing or Deleting a Service
To edit an existing service:
1. From the Port Triggering screen, select the service you want to edit from the list of services in
the Port Triggering Portmap Table.
2. Click Edit Service or Delete Service, as required.
3. If editing, change the service information on the Port Triggering - Services screen, as
described in “Adding a New Service” on page 5-5, and then click Apply.
WAN Setup Options
The WAN Setup options let you configure a DMZ server, change the MTU size, and enable the
wireless router to respond to a ping on the WAN port.
Figure 5-3
To Next Page
Loading...
Need help?
General
