NETGEAR WGT624 v4 User Manual

Super G Wireless Router WGT624 v4 User Manual
1-2 Configuring Internet Connectivity
v1.0, July 2008
Logging In to Your Wireless Router
You can log in to the wireless router to view or change its settings.
To log in to the wireless router:
1. Type http:/www./routerlogin.net, or http://www.routerlogin.com, or the router’s LAN IP
address (default is 192.168.1.1) in the address field of your browser, and then press Enter. A
login window displays:
2. Enter admin for the router user name and your password (or the default, password
). For
information about how to change the password, see “Changing the Administrator Password”
on page 4-6.
Note: Your computer must be configured for DHCP. For help with configuring DHCP, see
the documentation that came with your computer or see the link to the online
document in “Preparing a Computer for Network Access” on page B-1.
Figure 1-1
Note: The router user name and password are not the same as any other user name or
password you might use to log in to your Internet connection.

NETGEAR WGT624 v4 Specifications

General

Wireless Standard	802.11g
Frequency Band	2.4 GHz
LAN Ports	4 x 10/100 Mbps
WAN Port	1 x 10/100 Mbps
Security	WEP, WPA, WPA2
Wireless Data Rates	Up to 54 Mbps
VPN Pass-through	Yes
Antenna	2 x external
Interface	Ethernet
Firewall	NAT, SPI
Weight	0.66 lbs