EasyManuals Logo

NETGEAR WGT624 v4 User Manual

NETGEAR WGT624 v4
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Super G Wireless Router WGT624 v4 User Manual
2-4 Wireless Security
v1.0, July 2008
Information to Gather Before Changing the Wireless Settings
Before changing your wireless settings, print this form and record the following information. For
an existing wireless network, the person who set up or is responsible for the network can provide
this information. After you set up wireless security for the router, you must set up each computer
with the same wireless security settings in order to for it to join the wireless network.
Wireless network name (SSID): ______________________________
The SSID, also called
the wireless network name, for the wireless network. You can use up to 32 alphanumeric
characters. The SSID is case-sensitive.
If WEP authentication is used, circle one: Open System, Shared Key, or Auto.
WEP Encryption key size. Choose 64-bit or 128-bit. The encryption key size must be the
same for the wireless adapters and the wireless router.
Data encryption (WEP) keys. There are two ways to create WEP data encryption keys.
Passphrase method. ______________________________
These characters are case-
sensitive. Enter a word or group of printable characters and click Generate Keys. Not
all wireless devices support the passphrase method.
Manual method. These values are not case-sensitive. For 64-bit WEP, enter 10 hex
digits (any combination of 0-9 or a-f). For 128-bit WEP, enter 26 hex digits.
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
If WPA-PSK or WPA2-PSK Authentication is Used:
Passphrase: ______________________________
These characters are case-sensitive.
Enter a word or group of printable characters.
Use the procedures described in the following sections to configure the WGT624 v4. Store this
information in a safe place.
Note: If you select Shared Key, the other devices in the network will not connect
unless they are also set to Shared Key and are configured with the correct key.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WGT624 v4 and is the answer not in the manual?

NETGEAR WGT624 v4 Specifications

General IconGeneral
Wireless Standard802.11g
Frequency Band2.4 GHz
LAN Ports4 x 10/100 Mbps
WAN Port1 x 10/100 Mbps
SecurityWEP, WPA, WPA2
Wireless Data RatesUp to 54 Mbps
VPN Pass-throughYes
Antenna2 x external
InterfaceEthernet
FirewallNAT, SPI
Weight0.66 lbs

Related product manuals