Super G Wireless Router WGT624 v4 User Manual
3-6 Content Filtering
v1.0, July 2008
E-Mail Alerts and Web Access Log Notifications
The E-mail screen is shown below:
To set up e-mail alerts and log notifications:
1. To receive logs and alerts by email, you must provide your email information
• Turn E-mail Notification On. Select this check box if you want to receive e-mail logs
and alerts from the router.
• Your Outgoing Mail Server. Enter the name of your ISP’s outgoing (SMTP) mail server
(such as mail.myISP.com). You might be able to find this information in the configuration
menu of your e-mail program. If you leave this field blank, log and alert messages will not
be sent via e-mail.
• My Mail Server requires authentication. Select this check box if authentication is
required, and enter the user name and password.
• Send To This E-mail Address. Enter the e-mail address to which logs and alerts are sent.
This e-mail address will also be used as the From address. If you leave this field blank, log
and alert messages will not be sent via e-mail.
Figure 3-5
To Next Page
Loading...
Need help?
General
