NETGEAR WN802T User Manual

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Introduction 1-5
v1.0, September 2008
Back Panel of the NETGEAR Wireless-N Access Point
The back of the WN802T v2 contains the following listed items, viewed from top to bottom:
1. The Reset button, which is used to reset the WN802T v2 or restore the factory default settings.
See Appendix A, “Default Settings and Technical Specifications” for more information on
restoring the factory default settings.
2. The Ethernet port, used to establish a 10 Mbps, 100 Mbps or 1000 Mbps connection with the
network.
3. AC Universal Power Supply outlet.
NETGEAR Wireless-N Access Point Default Settings
Location
The label on the rear panel of the wireless access point contains the serial number, MAC address,
and default login information for your WN802T v2 device.
Figure 1-2 Back panel of the WN80Tv2
Reset button
Ethernet port
Power outlet

NETGEAR WN802T Specifications

General

Maximum data transfer rate	300 Mbit/s
MAC address filtering	Yes
Minimum system requirements	-Internet Explorer 6.0; -4 GHz 802.11n / 2.4 GHz 802.11 b/ g;
Compatible operating systems	Microsoft Windows 98, Me, 2000, XP, Mac OS, UNIX, / Linux

Weight and Dimensions

Weight	560 g
Dimensions (WxDxH)	225.5 x 172 x 39 mm