NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Wireless Security Settings 3-9
v1.0, September 2008
4. Under the Configuration tab, select Security from the main menu, and then select Security
Settings from the side menu.
5. Select WPA with RADIUS from the Network Authentication drop-down menu. Data
encryption will be set to TKIP by default (see Figure 3-3).
6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations).
7. Click Apply to save your settings.
Figure 3-3 WPA with RADIUS security settings
To Next Page
Loading...
