NETGEAR WN802T User Manual

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
4-12 Management
v1.0, September 2008
The default value is 100 ms.
• Aggregation Length. The default value is 65535 bytes.
• AMPDU (Aggregated-MAC Packet Data Unit). This is a feature in IEEE 802.11e and 802.11n
Wireless LAN Standard, which allows to build a group of frames before they are transmitted.
The default is Enabled
• RIFS (Reduced Inter-Frame Spacing) transmission. The default is Disabled.
• DTIM Interval. The Delivery Traffic Indication Message Interval specifies the data beacon
rate between 1 and 255.
The default value is 3.
• Preamble Type
. A long transmit preamble may provide a more reliable connection or slightly
longer range. A short transmit preamble gives better performance. The Auto setting will
automatically handle both long and short preamble.
The default setting is Auto.
To modify the Advanced Wireless Settings:
1. Select Wireless under the Configuration tab, then select Advanced from the side menu. The
Wireless Settings screen displays as shown in Figure 4-9.
Figure 4-9 Advanced wireless settings

NETGEAR WN802T Specifications

General

Maximum data transfer rate	300 Mbit/s
MAC address filtering	Yes
Minimum system requirements	-Internet Explorer 6.0; -4 GHz 802.11n / 2.4 GHz 802.11 b/ g;
Compatible operating systems	Microsoft Windows 98, Me, 2000, XP, Mac OS, UNIX, / Linux

Weight and Dimensions

Weight	560 g
Dimensions (WxDxH)	225.5 x 172 x 39 mm