NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
4-14 Management
v1.0, September 2008
• Authentication Server. This configuration is required for authentication using a RADIUS
Server.The IP Address, Port Number, and Shared Secret are required for communication
with the Primary RADIUS Server. You can also configure a Secondary RADIUS Server to
use, if the Primary RADIUS Server fails.
– IP Address. The IP address of the RADIUS Server.
– Port Number. The port number of the RADIUS Server. The default is 1812.
– Shared Secret. This is shared between the Wireless Access Point and the RADIUS
Server while authenticating the supplicant (wireless client).
• Accounting Server. This configuration is required for accounting using a RADIUS
Server. The IP Address, Port Number, and Shared Secret are required for communication
with the Primary RADIUS Server. You can also configure a Secondary RADIUS Server to
use if the Primary RADIUS Server fails.
– IP Address. The IP address of the RADIUS Server.
– Port Number. Port number of the RADIUS Server. The default: 1813.
– Shared Secret. This is shared between the Wireless Access Point and the RADIUS
Server while authenticating the supplicant (wireless client).
3. Authentication Settings:
• Re-authentication Time (Seconds). The time interval in seconds after which the
supplicant will be authenticated again with the RADIUS Server.
The default interval is 3600 seconds.
•
Update Global Key Every (Seconds). Enable this option to have the Global Key
changed according to the time interval specified. If enabled, enter the desired time
interval.
The default is enable, and the default interval is 3600 Seconds
4. Click Apply for your changes to take effect.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
