NETGEAR WN802T

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Index-3
v1.0, September 2008
wireless, test 2-12
connectivity area
see range
country/region 2-4, 4-8
default setting A-2
coverage
wireless network 1-1
CSMA/CA
RTS threshold 4-11
CSMA/CD
RTS threshold 4-11
CTS packet 4-11
Customer support 1-iii
D
data encryption. See encryption
data rate 2-9
data security. See encryption
data throughput 2-1
daylight saving time
adjustment for 2-5
default setting A-2
default login URL 2-14
default settings WN802Tv2
back label 1-6
factory A-1
DHCP
automatic assignment 2-6
connectivity, wireless 2-12
default setting 2-6, 2-13, A-2
disabled, configuration problem 6-3
IP address, fixed 6-3
IP address, reserve 2-13
server 1-2
status, client 4-9
support, client 1-2
DTIM interval 4-12
E
electromagnetic interference 1-1
encryption
AES, WPA2 with RADIUS 3-3, 3-10
AES, WPA2-PSK 3-14
AES/TKIP+AES 3-3
default A-2
key generation, dynamic 1-2
none 3-3
number of digits 3-7
open system 3-3
point to multi-point bridging 5-3, 5-5
shared key, WEP 3-3
strengths, available A-1
strengths/types A-3
TKIP+AES 3-3, 3-12, 3-15
TKIP+AES,WPA-PSK+WPA2-PSK 3-15
TKIP, WPA with RADIUS 3-9
TKIP, WPA-PSK 3-13
TKIP/TKIP+AES 3-3
type, supported 1-2
WEP 3-1
WEP, configure 3-6
wireless bridging and repeating
5-7
WPA/WPA-PSK 3-2
encryption type. See encryption
Ethernet cable 1-3
ethernet network
wireless communication 2-2
ethernet port
location 1-6
ethernet setup 2-2, 2-12
F
factory default settings A-1
restore 4-6
firmware
upgrade 4-3
version 4-8
flash memory
firmware upgrade 1-2
fragmentation length 4-11
frequency
output power 2-9
reduce interference 2-2
see also channel