NETGEAR WN802T - Page 93

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Index-5
v1.0, September 2008
see also passphrase 3-14
WPA2-PSK 3-14
WPA-PSK/WPA2/PSK 3-15
network key/passphrase 3-4
NTP client
enable 2-5
NTP Server
custom 2-5
NTP server hostname/IP address 2-5
O
open authentication 3-1
open system 3-3, 3-5, 3-6, 3-7
output power
settings 2-9
P
package contents 1-3
packet transmission
speed, max 1-1
panel
back 1-6
front 1-3
passphrase 3-4
see also Network Key
use with WEP 3-7
WEP keys 3-4
WPA2-PSK, use with 3-14
WPA-PSK/WPA2-PSK, use with 3-15
password
change 4-1
default 2-3, 2-14, 3-15
restore default 4-2
performance
data throughput 2-1
performance degradation
causes of 2-2
placement. See location
port
ethernet 1-6
RADIUS server 4-14
power consumption 2-1
power save 2-11
power supply 1-3
outlet 1-6
preamble type 4-12
preshared key passphrase 3-4, 3-13
prioritize traffic 1-2
Q
QoS 2-10
see Quality of Service
QoS settings
configure 2-10
Quality of Service 2-10
about 1-2
R
RADIUS
access control database 3-16
definItion 4-13
security profile 3-6
WPA and WPA2 3-11
WPA, with 3-8
WPA2, with 3-10
RADIUS server 4-13
accounting server settings 4-14
authentication server settings 4-14
shared secret 4-14
range
access point 1-1, 2-1
variation 2-1
reboot 4-5
region. See country
registering 1-iii
repeater without client association
enable 5-6
security types, supported 5-6
See also bridging
reset button 4-5
reset switch 1-6
restore