Configuring the Wi-Fi Network 117
Note: If you change either of the Wi-Fi network names or passwords, all connected devices will
be disconnected and will have to reconnect using the new values.
Note: For security reasons, it’s recommended you disable SSID Broadcast. (See Options Tab.)
To make your Wi-Fi passwords more secure:
● Use numbers and both uppercase and lowercase letters.
● Use special characters (for example, ‘@’, ‘#’, etc.).
Also, the password length depends on the Wi-Fi encryption type that you’ve selected. (See
Wi-Fi Security.)
● None – No password is required.
● WEP 64 bit – Open – The password must be 5 ASCII characters.
● WEP 64 bit – Shared – The password must be 5 ASCII characters.
● WEP 128 bit – Open – The password must be 13 ASCII characters.
● WEP 128 bit – Shared – The password must be 13 ASCII characters.
● WPA-Personal TKIP – The password must be 8 to 63 ASCII characters.
● WPA-Personal TKIP/AES – The password must be 8 to 63 ASCII characters.
● WPA2-Personal TKIP/AES – The password must be 8 to 63 ASCII characters.
● WPA/WPA2 Personal – The password must be 8 to 63 ASCII characters.
On the Touchscreen
1. Tap > Wi-Fi.
2. Tap Main Wi-Fi or Guest Wi-Fi to change that network’s name and password.
3. If you are changing the Guest Wi-Fi name or password, tap the second Edit button
(beside the Name and Password).
4. Tap the Edit button beside the Name or Password that you want to change.
5. Tap Continue. The edit window appears.
6. Change the name or password. See Using the LCD Keyboard.
7. If you saved your changes, follow the onscreen instructions to reconnect to Wi-Fi. (All
devices that were connected will have to reconnect with the new settings.)
To Next Page
Loading...
Need help?
General
