NETGEAR Zing User Manual

Zing Manager (Browser) Interface 82
Item
Description
tethered.
VPN Passthrough
VPN connections are enabled (On) or disabled (Off). See Enabling VPN
Passthrough.
DHCP Server
This field enables (On) or disables (Off) DHCP. See DHCP.
DHCP IP Range
This specifies the starting and ending address of the range of IP
addresses available for your device to dynamically (that is, not
permanently) assign to computers connected to it. See DHCP.
DHCP lease time
This is the amount of time, in minutes, a computer can use its assigned
IP address before it is required to renew the lease. After this time is up,
the computer is automatically assigned a new dynamic IP address. See
DHCP.
Enter a number between 2 and 10080.
DNS mode
This specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained.
● Manual – The routing hardware assigns DHCP clients the DNS
servers specified in the DNS 1 and DNS 2 fields
Use this option to access a DNS server that provides customized
addressing or if you have a local DNS server on your network.
Note: The DNS 1 and DNS 2 fields appear only if DNS Mode is
Manual.
● Auto – The DNS server specified by your wireless provider is
used.
DNS 1
Address of a manual DNS server. (This field appears only if DNS Mode
is Manual.)
DNS 2
Address of a manual DNS server. (This field appears only if DNS Mode
is Manual.)
DMZ
DMZ Enabled
Enable / disable demilitarized zone.
DMZ Address
If DMZ is enabled, this is the IP address of a single computer used to
receive all unsolicited incoming connections.

NETGEAR Zing Specifications

General

Brand	NETGEAR
Model	Zing
Category	Wireless Router
Language	English