MT 48 | 12
X
Use DAW1 for system sounds and consumer software only and use DAW2 for pro audio appli-
cations
X
Create stems on up to four DAW channels for the artist to create his/her own mix from melodic
instruments/vocals/bass/drums
X
Mix reference: Compare your DAW Mix with tracks played out from streaming/media player
software.
Section 3: Software Playback - Direct Routing
Channels activated in this section bypass the MT 48 Mixer. Usually, that’s NOT what you want.
But it is a useful option in some scenarios, for instance:
• If you want to manage your monitoring in the DAW instead of the MT 48. Direct Routing
allows you to address Headphones and speakers without going through the MT 48 mixer.
Keep in mind, though, that the MT 48 Mixer oers much lower latency compared to DAW
monitoring.
• If you want to use external outboard as hardware plug-ins in your DAW. In this case, bypass-
ing the MT 48 mixer via Direct Routing makes a lot of sense.
To Next Page
