Model H1301 Recovery and Recycling System
Installation, Operation and Maintenance Manual
Revision-L September, 2019
Page 43 of 105
VII. System Maintenance Procedures
This section of the manual will detail routine maintenance and calibrations to keep the
machine working at peak efficiency levels.
A. Recommended On-Hand Spare Parts Listing
Qty. Description Neutronics Part Number
10 Moisture Filter Core A4-05-2100-00-0
5 Acid Filter Core A4-05-2100-01-0
10 Filter Shell Gasket 4-04-7000-12-0
2 Particulate Filter Element A4-05-2500-00-1
2 Particulate Filter O-Ring A4-04-7060-00-0
2 Particulate Filter Backup Ring A4-04-7060-00-1
2 Solenoid Valve Rebuild Kit A4-04-0530-00-0
3 Access Valve Cap 4-04-5000-01-0
2 Access Valve Core 4-04-0000-01-0
1 ¼” Check Valve A4-04-5530-01-0
1 3/8” Check Valve A4-04-5540-02-0
B. Recommended Maintenance Schedule
Figure-7 depicts a recommended maintenance schedule for the user to perform to provide
trouble free operation. The user shall tailor the schedule to best meet the specific
application.
NOTE: Details of the cascading system recommended maintenance are provided by the
PP Series Temperature Chamber Operation, and Maintenance Manual attached following
this document.
To Next Page