4VAL Operating & Maintenance Manual Version 1.1 © Newman Labelling Systems Ltd Page 25 of 56
SECTION 3B MACHINE OPERATION – Allen Bradley
Allen Bradley Operator Panel.
3B.1 FAULT MESSAGE INDICATION
A machine fault will first stop the machine then give a fault message indication on the
display at the operator panel in either RUN or SETUP mode. The fault must be
cleared and the fault message acknowledged by pressing the RESET button before the
machine can be restarted. Refer to ‘Machine Operation – General’ section for detailed
description and corrective actions for fault messages.
Fault message indication – press RESET to acknowledge
To Next Page
Loading...