Newtec EL470 - Page 182

Modem Reference Manual for EL470 IP Satellite Modem
Command
DmMeasAGCCoSat
AGCCo level clipping
info
AGCCo lvl clipping
Command ntcDevsMod01DmMeasAGCCoSat
OID 1.3.6.1.4.1.5835.3.1.13.1.33.1.1
Values Factory Default
equal
Enumeration Value
>
<
0
1
2
Command
DmMeasAGCCo
Power spectral density Power spectral densi
Used as
variable of
Command(s)
DmMeasAGCCoStruct
Page
157
Description
Readout of the power spectral density expressed in dBm/Hz.
RMCP
Command
Rlc Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01DemodulatorEntry
Command ntcDevsMod01DmMeasAGCCo
OID 1.3.6.1.4.1.5835.3.1.13.1.16.1.1
Values GUI Unit
dBm/Hz
Cmd Unit Factory Default (CU)
dBm/Hz - 125.6
Expert Range (CU)
-140 .. -80
Command
IfChConfigEthRxEnable
Active Active
Used as
variable of
Command(s)
IfChConfigEthRx
Page
58
Description
Configuration command to enable or disable the Ethernet Rx configuration
entry.
RMCP
Command
IRe Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfChConfigEthRxEnable
OID 1.3.6.1.4.1.5835.3.1.4.1.61.1.1
Values Factory Default
disabled
Enumeration Value
Disabled
Enabled
0
1
version 3.1
175
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS