Newtec EL470 - Page 255

Alarms Reference Manual for EL470 IP Satellite Modem
Special Command
AlAlarmsMode
Alarm mode string Alarm mode string
OID 1.3.6.1.4.1.5835.3.1.2.1.11.0.1
Get Command Arguments Set Command Arguments
Command(s) / Variable(s) Page Command(s) / Variable(s) Page
none none
AlAlarmString
231
Get Reply Values Set Reply Values
Command(s) / Variable(s) Page Command(s) / Variable(s) Page
AlAlarmString
231
AlAlarmString
231
Special Command
AlAlarmCur
Current alarm status Current alarm status
Location /Config
Description
Readout of the current alarm status for the specified alarm from the alarm
buffer.
• 0 = Currently, no alarm is present.
• 1 = Currently, the alarm is active. A get request returns the current
alarm buffer contents without resetting the buffer.A set command
returns the current alarm buffer contents and resets the buffer.
RMCP
Command
Cas Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01AlarmEntry
Command ntcDevsMod01AlAlarmCur
OID 1.3.6.1.4.1.5835.3.1.2.1.4.0.1
Get Command Arguments Set Command Arguments
Command(s) / Variable(s) Page Command(s) / Variable(s) Page
AlAlarmId
232
AlAlarmId
232
Get Reply Values Set Reply Values
Command(s) / Variable(s) Page Command(s) / Variable(s) Page
AlAlarmStatus
233
AlAlarmStatus
233
Special Command
AlAlarmMem
Memorised alarm
counter
Alarm counter
Location /Config
Description
Readout of the memorised alarm counter for the specified alarm.
• 0 = No alarm events occurred since last alarm reset.
• n = n alarm events occurred since last alarm reset with n an integer
number.A get request returns the memorised alarm counter
contents, the counter is not reset.A set command returns the
memorised alarm counter contents and resets the counter.
RMCP
Command
Mas Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01AlarmEntry
Command ntcDevsMod01AlAlarmMem
OID 1.3.6.1.4.1.5835.3.1.2.1.6.0.1
version 3.1
248
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS