(ii)
damage caused by accident, abuse, misuse (including damage resulting from use of non-approved consumables
(including but not limited to non-Nexa3D Branded Consumables and/or non-Nexa3D Certified Materials) or
other third-party non-approved products);
(iii)
relocation of Hardware without the use of Nexa3D approved procedures or Nexa3D authorization;
(iv)
loss or interruption of electric power;
(v)
improper or inadequate maintenance or calibration, failure to perform user maintenance as defined in the
User Guide for the Product;
(vi)
contamination of the Consumables due to improper handling or storage of the Consumables;
(vii)
modification of the Hardware without the written permission of Nexa3D;
(viii)
Hardware on which the Nexa3D serial number has been removed or defaced or for which you cannot provide
proof of purchase and payment;
(ix)
taxes, tariffs, and duties associated with the importing or exporting of warranty and non-warranty parts;
(x)
failure to comply with the Product Use Requirements;
(xi)
failure to comply with the User Guide, including Workspace Preparation and Installation Requirements or
environmental conditions that do not conform to our specifications;
(xii)
abuse, negligence, accident, loss or damage in transit, fire or water damage, electrical disturbances,
transportation by Nexa3D Authorized Reseller or End User or other causes beyond our control;
(xiii)
virus, infection, worm, or similar malicious code not introduced by Nexa3D; or
(xiv)
any other unauthorized use of the Products, including any claims made by End Users.
Special Provision for Customer Replaceable Units (CRU). Customer shall be solely responsible for the
installation of each CRU delivered to Customer during the Standard Hardware Warranty Period or
Extended Hardware Warranty Period. Any and all replaced CRUs shall be returned to Nexa3D no later than
ten (10) business days after the date of delivery of the new CRU to the Customer.
Disclaimer for 3D Printed Parts. NEXA3D MAKES NO REPRESENTATIONS, GUARANTEES, OR
WARRANTIES OF ANY KIND WITH RESPECT TO THE 3D PRINTED PARTS, WHETHER EXPRESS OR
IMPLIED, INCLUDING ANY GUARANTEE, REPRESENTATION, OR WARRANTY RELATING TO THE
COMPLIANCE OF THE PRODUCT TO PRINT A 3D PRINTED PART THAT MAY BE COVERED BY
REGULATION, THE COMPLIANCE OF ANY 3D PRINTED PART WITH ANY SPECIFIC
REGULATION, THEIR CONDITION, CONFORMITY TO ANY DESCRIPTION, THE EXISTENCE OF
ANY LATENT OR PATENT DEFECTS IN THE 3D PRINTED PARTS OR ANY WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. THE
CUSTOMER ASSUMES THE ENTIRE RISK RELATING TO THE USE OR PERFORMANCE OF THE 3D-
PRINTED PARTS. AND NEXA3D SHALL NOT BE LIABLE FOR ANY DEFECT, DEFICIENCY, OR
NONCONFORMITY IN THE 3D PRINTED PARTS.
To Next Page
Loading...