1. Welcome to your XiP 3D Desktop Printer
Congratulations on the purchase of your new XiP ultrafast desktop 3D printer!
We’re sure you’re excited to get started with your new equipment but it is
important to read this guide carefully for a safe and seamless experience.
We’ll show you how to unpack your printer and run through your first print from
beginning to end. We will also discuss important safety precautions and point you to
key resources to continue your learning.
If you need any further help, our team is always on hand. You can reach out to
support@nexa3d.com or call 805.465.9001. Further instructions are also on our
website: nexa3d.com/support
We can’t wait to start this game-changing journey together.
Enjoy!
— The XiP team
To Next Page
Loading...