DD OO NN EE
RREEDD GGRREEEENN BBLLUUEE **FFRREEEE** **FFRREEEE** **FFRREEEE**
BB
LLIIVV EE
EEDDIITT UUNNIITT FFUUNNCCTTIIOONN......
10.5 MENU: FADERS FUNCTIONS
---------------------------------------------------------------------------------------------------------------------
AVAILABLE ONLY AFTER THE ACTIVATION OF THE MENU FUNCTIONS (see par.10.1)
---------------------------------------------------------------------------------------------------------------------
ALLOWS TO ASSIGN THE NAME OF THE DMX CHANNEL TO DETERMINED FADERS
THIS FUNCTION IS VALID IN THE MODE OF OPERATION EDIT SCENE (SEE
PAR 4.5) AND MANUAL (SEE PAR 4.10)
This function is used when we have the need to control a determined chan-
nel (of all the connected units), always and only from a faders.
The display changes as shown in (Fig. 49).
When yuo keep the fader to zero value the display shows the writing
**ffrreeee**
, free
from assignments, the channels come loaded from the controller in an original way.
Move the fader of the section "A" or " B," to assign a memorized channel.
Through the encoder or the 1/12 keys directly above at the faders you can roll
forward/back for a more precise search.
To assign the channel press the
DONE
or
OK
key
To get out of the function press the
EESSCC
key.
Fig. 49
Shows the
33
faders of the
AA
section
Indicate that the channel
can be modified with the
encoder
Shows the
33
faders of the
BB
section
Key to confirm
Key to assign the
channel in live way
see par 10.6
GB
To Next Page
Loading...
