10.20 MENU: WI-DMX TRANSMITTER
---------------------------------------------------------------------------------------------------------------------
AVAILABLE ONLY AFTER THE ACTIVATION OF THE SYSTEM SETTINGS
(see par.10.14)
---------------------------------------------------------------------------------------------------------------------
ALLOWS TO PAIR WI D PEN RECEIVER, CHANGE THE RADIO CHANNEL AND TO
SELECT OF WIRELESS CONTROLLED UNITS
.
the display will change as shown in (Fig. 70)
GB
WI-DMX TRANSMITTER
SSEETT NNEEWW CCHHAANNNNEELL
SSEENNDD RRAADDIIOO PPAAIIRRIINNGG
SSEELLEECCTT WWIIRREELLEESSSS UUNNIITTSS
PAIRING:
1) Power up
WWii DD PPeenn
receiver
2) Hold the button until the
WWii DD PPeenn
led starts blinking red/green alternately
3) In Matrix Live through the encoder find
SSEENNDD RRAADDIIOO PPAAIIRRIINNGG
4) Press
OOKK
key and wait the
DDOONNEE
message
5) The
WWii DD PPeenn
receiver is paired
TO CHANGE RADIO CHANNEL:
1) Power up
WWii DD PPeenn
receiver
2) In Matrix Live through the encoder find
SSEETT NNEEWW CCHHAANNNNEELL
3) Press
OOKK
key and wait the
DDOONNEE
message
4) The
WWii DD PPeenn
receiver has change radio channel and led’s colour
SELECTION OF WIRELESS CONTROLLED UNITS:
1) Through the knob find the writing
SSEELLEECCTT WWIIRREELLEESSSS UUNNIITT
2) Confirm with the
OOKK
key
3) Select the units that will work in wireless and confirm with the
DDOONNEE
key
Fig. 70
To Next Page
Loading...
