Next Matrix Live - Page 60

10.19 MENU: SD CARD ACCESS
---------------------------------------------------------------------------------------------------------------------
AVAILABLE ONLY AFTER THE ACTIVATION OF THE SYSTEM SETTINGS (see par.10.14)
---------------------------------------------------------------------------------------------------------------------
ALLOWS TO UPDATE SOFTWARE, LIBRARY, SAVE THE PROGRAMMING AND TO
RESTORE USER DATA.
The display changes as shown in (Fig. 70)
GB
SD CARD ACCESS
BBAACCKKUUPP UUSSEERR DDAATTAA
RREESSTTOORREE UUSSEERR DDAATTAA
UUPPDDAATTEE FFIIXXTTUURREE LLIIBBRRAARRYY
BBAACCKKUUPP PPEERRSSOONNAALL LLIIBBRRAARRYY
SSOOFFTTWWAARREE UUPPDDAATTEE
EERRAASSEE FFIILLEESS FFRROOMM CCA
ARRDD
DO NOT REMOVE THE CARD DURING READING AND WRITING OPERATIONS
BACKUP USER DATA
Press OK to save programming data, default is
MMAATTRRIIXX..BBAAKK
. Press
SSAAVVEE
to confirm.
Press
NNAAMMEE
to change the name, Through the encoder choose the character, Through
the OK or CHAR Key we insert/modify the next/precedent character. Press
SSAAVVEE
to
save programming data.
RESTORE USER DATA
Press OK to restore programming data.
Through the encoder choose saved file, press
LLOOAADD
to load the file.
UPDATE FIXTURE LIBRARY
Press OK to update fixture library.
Through the encoder choose the .
LLIIBB
file from Codem provided, press
LLOOAADD
to load the
file.
BACKUP PERSONAL LIBRARY
Press
OOKK
to save personal library, default is
MMYYLLIIBB..BBAAKK
. Press
SSAAVVEE
to confirm.
Press
NNAAMMEE
to change the name.
SOFTWARE UPDATE
Press OK to update the software.
Through the encoder choose the .
FFWWUU
file from Codem provided, press
LLOOAADD
to load
the file.
Do not turn off Matrix during this operation.
ERASE FILES FROM CARD
Press
OOKK
to delete card files.
Through the encoder choose the file, press
EERRAASSEE
to erase.
Fig. 70