Need help?Do you have a question about the Nexus NX2 and is the answer not in the manual?
Lists all parts included with the NX2 GPS Navigator for mounting and operation.
Overview of core functionalities like Position, Navigation, Waypoints, Routes, MOB, and Time display.
Built-in race timer for sailracing. PC-interface for data transfer and monitoring.
Steps for physically installing the instrument, including drilling and cable connections.
Describes standalone and Nexus Network installation configurations for the instrument.
Details wiring for NEXUS databus, power, and NMEA 0183 interfaces.
Default units, position presentation, bearing, and configuration settings.
Explains status symbols (2D, 3D, DGPS) and cold/warm start procedures.
Details the function of PAGE, LIGHT CONTROL, MINUS, PLUS, and SET buttons.
Covers Access Settings, Clear, MOB, Escape, Back Step, and Search.
Accesses Lat/Lon, Date/Time, Battery, and Satellite Status.
Manages waypoints: Mark, Edit, Copy, Move, Delete, Edit Bearing/Range.
Provides Combi View, X-Track Error, ETA, TTG, Drift, WCV, CTS.
Covers Sail Plan, Route Call, Reverse Call, Delete, and Route Store.
Configures units, alarms, and arrival line settings.
Adjusts GPS parameters, NMEA I/O, and DGPS.
Sets magnetic bearing, beep, WP-BANK, and instrument mode.
Describes NMEA 0183 sentences sent/received by the instrument.
Explains integration with external navigators and chartplotters.
Basic checks and explanation of error messages.
Provides physical dimensions, power consumption, temperature range, and weight.
Instructions for cleaning, storage, and contact protection.
Details the two-year warranty terms, conditions, and claims procedure.
List of abbreviations used in the manual with their meanings.
Lists technical specs, Nexus Network policy, and optional accessories.
To Next Page
General
