Need help?Do you have a question about the Nexus Multi Control and is the answer not in the manual?
Details on where to mount the Nexus Server for optimal performance and safety.
Step-by-step guide for physically installing the Nexus Server unit.
Guidance on choosing the best location for the Nexus Multi Control instrument.
Instructions for mounting the Nexus Multi Control instrument and connecting cables.
How to connect various transducers (log, depth, wind, compass) to the Server.
Instructions for connecting additional accessories like MOB buttons and buzzers.
How to connect the instrument lighting to the boat's switch.
Connecting external NMEA devices to the Server's input.
Connecting external NMEA devices to the Server's output.
Instructions for connecting the power supply to the Nexus system.
Information on using older transducers with the new system.
Details the manual's conventions and scope for user understanding.
Explains the function and operation of each of the four push-buttons.
Displays the primary boat speed through the water measurement.
Details various secondary speed-related functions like logs and timers.
Shows the primary depth measurement from the water surface or keel.
Covers various depth-related alarms and settings like shallow and anchor alarms.
Displays heading information, true or magnetic, and course over ground.
Details various navigation functions like steer reference, waypoints, and track error.
Explains steer reference functions and their use with the analogue steer pilot.
Instructions for storing, editing, and managing waypoints in the system.
Procedure for creating and managing sailplans (sequences of waypoints).
Configuration and function of the arrival alarm for waypoints.
Displays apparent or true wind angle, speed, and direction.
Covers wind damping, true wind speed, and geographic wind direction.
Utilizing wind data for tactical sailing decisions and tacking.
Procedure for moving and locking display sub-functions.
Process for copying and locking sub-functions to different display pages.
Determines which display page appears upon instrument power up.
Procedure for calibrating the speed transducer and related settings.
Steps for calibrating depth measurements and transducer position.
Calibration settings for navigation functions like compass and GPS.
Procedures for compensating and checking compass deviation and misalignment.
Calibration settings for wind transducers and mast top units.
Settings for calibrating network communication and NMEA data.
Routine cleaning and care instructions for the instruments and transducers.
Troubleshooting common issues and error messages with the system.
Detailed technical data including dimensions, power, and operating ranges.
Overview of the Nexus data bus and its usage policy.
List of available optional accessories for the Nexus system.
Glossary of abbreviations used throughout the manual.
To Next Page
General
