53
11 Customise your display
All sub-functions are organised in a list under the main-function.
The first location in the sub-function list is an empty display. You
can have your favourite sub-function moved in the same sub-
function list, or copied and locked to any other page.
11.1 Move and lock a sub-function
Example: In SPEED page, move and lock the sub-function depth
(DPT) to the top of the sub-function list.
Select the SPEED page and find the sub-function depth (DPT).
Press MODE and KEY together.
All digits flash.
To move and lock the sub-function press KEY.
Each time the SPEED page is selected, the sub-function (DPT)
will be displayed at the top of the sub-funtion list.
11.2 Copy and lock a sub-function
Example: Copy and lock the sub-function true wind speed (TWS)
from WIND page to SPEED page.
Select WIND page and find the sub-function (TWS).
Press MODE and KEY together.
All digits flash.
To move and copy to SPEED page, press MODE.
To lock the function, press KEY.
Each time the SPEED page is selected,
the sub-function (TWS) will be displayed.
The copied sub-function remains in its original location. It is only
copied to a second location, where it takes the place of the empty
sub-function in the list.
Note: The sub-function damping (SEA) should not be moved, to
avoid misunderstanding.
11.3 Select power on function
The last selected combination of page and sub-functions
according to your selection in 11.1 is the first page the instrument
will display at power up.
CUSTOMISE YOUR DISPLAY
To Next Page
Loading...
