Nexus Multi Control - Go to Waypoint, from Other than Your Present Position

44
To add waypoints/legs to the sailplan, press UP to display (Goto
NXT).
To unlock and add waypoints/legs, press KEY and repeat the
above described process.
To exit the (Goto WP) function, press MODE.
When you arrive at a waypoint in the sailplan, a series of
automatic actions take place:
• The audible and visual arrival alarm is triggered. (See 8.6).
• The next waypoint in the sailplan (Goto NXT) will be activated
as the new (Goto WP).
• The arrival waypoint is changed into the (Go From) waypoint.
• The previous (Go From) waypoint is cancelled from the
sailplan.
When you have arrived at your last waypoint in the sailplan, the
last waypoint will remain in memory (displayed as (Goto) and no.)
and the sailplan will remain ”active” (still calculating navigation
data), until the power is cut.
If you want to cancel the last waypoint from the sailplan memory
and thereby stop the navigation, press DOWN and UP together,
when (Goto) and no. is displayed.
After that, (Goto WP) will be displayed, which confirms the
sailplan is empty.
8.5.2 Go to waypoint, from other than your present position
Position to go from (Go FROM) is displayed as waypoint (00)
when you navigate from your present position.
If you want to start navigation from any other waypoint (01 - 99),
you can select that other waypoint number as your (Go FROM)
position.
To start navigation from any other waypoint than the present
position (00), example: (Go FROM) waypoint number (05) to
(Goto NXT) number (06).
Select sub-function (Goto WP), and press KEY.
To select the function (Go FROM), press DOWN until (Go FROM)
is displayed.
To change function (Go FROM) from present position (00) to
waypoint number (05), press KEY.
The first digit flashes.
To change from (00) to (05), press MODE and UP until 5 is
displayed.
To store the value, press KEY.
NAVIGATION FUNCTIONS