Nexus Multi Control - C20, Calibration of Depth; C30, Calibration of Navigation; C13 (off Sog); C20 (Ret)

58
12.1.4 C13 (OFF SOG)
Select speed transducer to be displayed as main-function under
SPEED.
(OFF) = Boat speed through the water from log transducer.
(ON) = Speed Over Ground (SOG) from navigator.
12.2 C20, calibration of depth
12.2.1 C20 (RET)
To return to normal mode, press KEY.
12.2.2 C21 (Unit m)
Unit for depth. Metre (m), feet (Ft) or fathoms (FA).
12.2.3 C22 ( - 00.0 ADJ)
Calibration of the depth transducer position.
This option is used to select whether the displayed water depth is
measured from the water level or the keel.
To measure from the keel, use the minus ( - ) sign.
Example: ( - 01.2 ADJ). The distance from the transducer to the
keel is 1.2 m
To measure from the water surface, use the underlining character
( _ ) sign.
Example: ( _ 00.4 ADJ). The distance from the transducer to the
water surface is 0.4 m.
The selected value will be subtracted or added from the measured
depth.
12.2.4 C23 (Unit°C)
Unit for temperature. Celsius (C) or Fahrenheit (F).
12.2.5 C24 (0°C TMP)
Value for compensation of the temperature.
To add, use underlining character ( _ ) ahead of the digit ( _1
TMP).
To subtract, use minus character ( - ) ahead of the digit (-1 TMP).
12.3 C30, calibration of navigation
12.3.1 C30 (RET)
To return to the normal mode, press KEY.
12.3.2 C31 (00° OCA)
Off Course Alarm. Can be set between 00°and 99°
(00°) = Alarm is turned off.
CALIBRATION