GPS NAVIGATOR
7.2 ALARMS
Arrival circle alarm, within the set radius.
Ex. shows circle with 0.20 Nautical miles radius.
Note! The Circle Alarm MUST be in Nautical Mile.
7.2.1 Arrival line ON/OFF.
(see drawing;).
7.2.2 Auto change
Auto change to next WP in the sail plan. Can be important when
used with autopilots.
7.2.3 X-track error limit.
Ex. shows alarm value entered, 2.5 NM.
Note! The XTE Alarm MUST be in Nautical Mile
7.2.4 start time
Set actual start time (within 18 hrs) to be used to trig the NX2
Multi Control start timer.
RETURN from ALARM set-up.
39
To Next Page
Loading...
