GPS NAVIGATOR
4.1 DEFAULT SETTINGS FROM FACTORY
UNITS are set to Nautical Mile for distance, Knots for speed and
Metres for altitude.
POSITION presentation is set to present position in degrees
minutes and
1/1000 of a minute. Alternative is degrees minutes
and seconds.
TRUE bearing and course over ground. MAGNETIC course can be
set as an alternative. Local magnetic variation must then be set.
CONFIGuration is set for this instrument and the NX2 GPS
Antenna. For repeaters or other combinations, please see settings
in chapter 7.7.
18
To Next Page
Loading...
