GPS NAVIGATOR
2.1 Basic Features
2.1.1 Position (POS)
Position is given in latitude and longitude to 3 decimal places with selectable set-up for
minutes and seconds or minutes and 1 000ths of minute. Altitude in METRES or FEET
can also be displayed.
2.1.2 Navigation (NAV)
Course and Speed Over Ground (COG/SOG) in knots, km/h or miles/h.
Select either magnetic or true, for both course over ground and bearing to waypoints.
This will be clearly "flagged" with the reversed text MAGNETIC on the LCD to prevent
confusion and uncertainty. Distance to WP is selectable in nautical miles, kilometres or
miles. Actual X-track error is displayed to 3 decimal places which is perfect for high
precision Differential GPS navigation.
2.1.3 Waypoint (WP)
Store up to maximum 399 WP in lat/long each with a 7 character name. You may Copy,
Move or Delete a single WP or in a block.
2.1.4 Route (ROUTE)
Up to 25 "named" routes can be stored with 24 WP in each route.
They can also be called and used "reversed" (e.g. return to harbour).
2.1.5 MAN OVER BOARD
For your safety, the M.O.B. (Man over board) function can be activated very easily.
Please see chapter 5.8.
2.1.6 TIME
Month, day and time is displayed (local time can be set). When navigating towards a
waypoint, both ETA (estimated time of arrival) and TTG (estimated time in hours and
minutes to go) is displayed.
8
To Next Page
Loading...
