GPS NAVIGATOR
1 Part specifications
NX2 GPS Navigator is delivered with all parts for mounting. Check prior to installation.
Wind Data instrument
Qty. Description Reference
1 Instrument, NX2 GPS Navigator 1
1 Instrument front cover 2
1 Drill template 3
1 Installation and user manual 4
1 Warranty card 5
2 Pin bolts for instrument mounting 6
2 Nuts for instrument mounting 6
1 Tube of silicon grease 6
1 Connection cover 6
2 4-pol screw terminal 6
1 Instrument Cable 8m 7
1 Power cable, red and black, 3 m (9 ft) 8
5 Extra wire protectors, 0,25 mm (1/100”) 9
5 Extra wire protectors, 0,75 mm (1/32”) 9
Additional in GPS Navigator complete with GPS Antenna
1 GPS Antenna 10
3 Mounting screws for Antenna 11
Registering of this product
Once you have checked that you have all the listed parts, please take time to fill in the
warranty document and return it to your national distributor.
By returning this document, it will assist your distributor to give you prompt and expert
attention, in the event of your experiencing difficulties with this product. Keep your proof
of purchase. Also, your details are added to our customer database so that you
automatically receive new product catalogues as and when they are released.
5
To Next Page
Loading...
