Nibe F2040 Technical Manual

F2040-16F2040-12F2040-8Air-water heat pump
0.390.290.19l/sMin flow, climate system, at 100% circulation
pump speed (defrosting flow)
0.250.150.12l/sMin flow, heating
0.320.200.15l/sMin flow, cooling
58/25°CMax/Min heating medium temp continuous
operation
G1"Connection heating medium ext thread
Dimensions and weight
114511451035mmWidth
452452422mmDepth
1450 (+50/-0)995 (+50/-0)895 (+50/-0)mmHeight with stand
13510590kgWeight (excl. packaging)
Miscellaneous
IP 24Enclosure class
dark greyColour
064 108064 092064 109Part No.
1)
Max. permitted impedance in the mains connected point in accordance with EN 61000-3-11. Start currents can cause short voltage dips
that could affect other equipment in unfavourable conditions. If the impedance in the mains connection point is higher than that stated
it is possible that interference will occur. If the impedance in the mains connection point is higher than that stated check with the power
supplier before purchasing the equipment.
2)
Specified output is limited with lower fusing.
NIBE™ F2040Chapter 8 | Technical data104

Nibe F2040 Specifications

General

Type	Air/water heat pump
Refrigerant	R410A
Operating Temperature Range Heating	-20°C to 35°C
Operating Temperature Range Cooling	10°C to 46°C
Sound Power Level	56-62 dB(A) (depending on model)