Nibe FIGHTER 1120 - Basic Values for the Automatic Heating Control

Settings
7
FIGHTER 1120
Changing the room temperature manually.
If you want to temporarily or permanently lower or
raise the indoor temperature relative to the previously
set temperature, turn the
“Heating curve offset” knob
anticlockwise or clockwise. One scale marking corre-
sponds to a change of about one degree in the room
temperature.
NOTE! An increase in the room temperature may be
“inhibited” by the radiator or floor heating thermostats,
if so these must be turned up.
Changing the room
temperature
A BI II III I II
50.0 C
Hotwa tertempera t u re
13.43
1.0
A
Heating
curve offset