Nibe FIGHTER 1120 - Other Settings

Control
51
Other settings
Menu 8.2.0 Operating mode
Settings regarding auto mode can be made in the sub-
menus to this menu.
Operating mode
8.2.0
Menu 8.2.2 Winter mode temp.
Here you select the average temperature when the
heat pump, in auto mode, shall switch to winter mode.
The circulation pump and immersion heater are acti-
vated. The value is adjustable between 0 and 30 °C.
20°C
Winter mode temp.
8.2.2
Menu 8.2.1 Summer mode temp.
Here you select the average temperature when the
heat pump, in auto mode, shall switch to summer
mode. In summer mode the circulation pump and
immersion heater are blocked, only hot water is pro-
duced. The value is adjustable between 0 and 30 °C.
25°C
Summer mode temp.
8.2.1
U
U
U
Menu 8.1.0 Display settings
Settings concerning language and menu type are set
on the sub-menus to this menu.
Display settings
8.1.0
Menu 8.1.1 Operation mode types
The menu type is chosen here: Normal, extended or
service.
Normal, covers the normal user's needs.
Extended, shows all menus except the service
menus.
Service, shows all menus, returns to the previ-
ous menu level 30 minutes after the last button
was pressed.
Normal
Operation mode types
8.1.1
Menu 8.1.2 Language
Language settings are made here.
English
Language
8.1.2
Menu 8.1.4 Light intensity
The light intensity in idle mode is set here. The value
is adjustable between 0 and 2. Idle mode occurs 30
minutes after the last button was pressed.
0=shut-off, 1=low, 2=average.
2
Light intensity
8.1.4
Menu 8.1.3 Contrast
The display's contrast is set here. The value is
adjustable between 0 and 31.
15
Contrast
8.1.3
N
U
N
N
U
N
U
S
Menu 8.2.3 Return
Pressing the enter button returns you to menu 8.2.0
Return
8.2.3
FIGHTER 1120
Menu 8.1.5 Return
Pressing the enter button returns you to menu 8.1.0
Return
8.1.5