Service menus
FIGHTER 1220
For the Installer
38
Menu 9.2.10 Pool control
Settings whether pool control should be On or Off.
Basic setting is Off
Off
Pool control
9.2.10
S
Operating settings
Menu 9.2.9.6 Return
Pressing the enter button returns you to menu 9.2..9.0
Return
9.2.9.6
S
Menu 9.2.11 Brine pressostat
You set here whether an external brine
pressostat/load monitor is connected to the load moni-
tor card.
Off
Brine pressostat
9.2.11
S
Menu 9.2.12 Brinepump 10 days
The brine pump can be active for 10 days when the
installation is started. The basic setting is Off
Off
Brinepump 10 days
9.2.12
S
Menu 9.2.15 RCU Present
No function.
Off
RCU Present
9.2.15
S
Menu 9.2.17 Return
Pressing the enter button returns you to menu 9.2.0
Return
9.2.17
Menu 9.2.14 Factory setting
Return to the factory settings in FIGHTER 1220, Yes
or No.
No
Factory setting
9.2.14
S
Menu 9.2.16 HPAC Present
Here you set whether HPAC is installed in the system
of not.
Off
HPAC Present
9.2.16
S
To Next Page
Loading...
