English – 1
English
CONTENTS
QUICK GUIDE (images only) I-XI
1 1
2 PRODUCT DESCRIPTION AND INTENDED USE 2
3 INSTALLATION 2
3.1 VERIFYING THE SUITABILITY OF THE GATE AND ENVIRONMENT 2
3.2 VERIFYING THE PRODUCT’S APPLICATION LIMITS 2
3.3 PRODUCT TECHNICAL SPECIFICATIONS 2
3.4 PRE-INSTALLATION WORKS 3
3.5 INSTALLING THE FILO GEARMOTOR (model 400C/600C) 4
3.5.1 4
3.5.2 INSTALLATION WITH 5
3.6 INSTALLING THE PHOTOCELLS model PH200 5
3.7 INSTALLING THE FLASHING LIGHT model FL200 5
4 ELECTRICAL CONNECTIONS 5
4.1 ELECTRICAL CONNECTION TO THE CONTROL PANEL 5
4.2 POWER SUPPLY CONNECTION 5
5 PROGRAMMING 6
5.1 CONTROL UNIT KEYS 6
5.2 INITIAL CHECKS 6
5.3 MEMORISATION OF CONNECTED DEVICES 6
5.4 MEMORISATION OF THE GATE LEAF LENGTH (opening and closing) 7
5.5 MEMORISATION OF THE 1
ST
TRANSMITTER 7
5.6 BASIC ADJUSTMENTS 8
5.6.1 Choosing the gate manoeuvre speed 8
5.6.2 Choosing the gate manoeuvre operating cycle 8
6 TESTING AND COMMISSIONING 8
6.1 TESTING 8
6.2 COMMISSIONING 9
7 MAINTENANCE 9
8 PRODUCT DISPOSAL 9
9 FURTHER INFORMATION 9
9.1 ADVANCED ADJUSTMENTS 10
9.1.1 Adjusting the parameters using the transmitter 10
9.1.2 Presence function 10
9.1.3 Verifying the values set for each parameter using the transmitter 10
9.2 ADDING OR REMOVING DEVICES 10
9.2.1 Memorising additional devices 10
9.2.2 Adding optional photocell 11
9.3 MEMORISING ADDITIONAL TRANSMITTERS 12
9.3.1 Mode 1 memorisation procedure 12
9.3.2 Mode 2 memorisation procedure 12
9.3.3 Memorisation procedure near the control unit with two transmitters 12
9.4 DELETING THE MEMORY OF THE INDIVIDUAL TRANSMITTER FROM THE CONTROL UNIT’S MEMORY 13
9.5 COMPLETE DELETION OF THE RADIO MEMORY 13
9.6 INSTALLING THE BACK-UP BATTERY 13
9.7 INSTALLING THE SOLAR POWER SYSTEM KIT model SOLEKIT 13
9.8 230 V LIGHT OUTPUT CONNECTION 14
9.9 INSTALLING THE EXTERNAL RELEASE SYSTEM model KS200KIT 14
9.10 DIAGNOSTICS AND DEVICE SIGNALS 14
9.10.1 Photocell signals 14
9.10.2 Flashing light signals 15
9.10.3 Control unit signals 15
9.11 SPECIFICATIONS 16
9.11.1 ECSBus system 16
9.11.2 Stop input 16
9.11.3 Product durability 16
10 TROUBLESHOOTING 17
11 USER GUIDE (to be delivered to the end user) (detachable insert) A
ANNEX I (detachable insert) B
EC Declaration of Conformity 01
To Next Page
Loading...
Need help?
General
