To Next PageTo Next PageWhat to do if Nice FILO600C Garage Door Opener flashing light is not working?
If your Nice Garage Door Opener is working, but the flashing light isn't, check if the Flash terminal of the flashing light is receiving power during operation (it should be roughly 10–30 VAC). If it is powered, the lamp is likely faulty and needs replacement.
Why does my Nice FILO600C start then reverse?
If your Nice Garage Door Opener starts to move but then immediately reverses, it might be because the 'motor force' setting is too low. First, make sure nothing is blocking the door's path. If there are no obstructions, you may need to increase the motor force setting.
General| Brand | Nice |
|---|---|
| Model | FILO600C |
| Category | Garage Door Opener |
| Language | English |
Step-by-step guide for assembling and wiring the PH200 photocell unit.
Visual instructions for assembling and connecting the FL200 flashing light device.
Guide on wiring the control unit and connecting the power supply.
Emphasizes the role of a qualified electrician for initial system start-up.
Instructions for programming the automation system's various functions.
Essential safety instructions and precautions for installation and operation.
Steps for installing gearmotor with new or existing racks.
Procedures for connecting control unit and main power supply.
Control unit keys, functions, and pre-programming checks.
Detailed steps for testing system functions and safety features.
Final actions after testing to ready the system.
A guide to common malfunctions, causes, and solutions.
