EasyManuals Logo

Nidec Digistart D3 User Manual

Nidec Digistart D3
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14 Digistart D3: User Guide
Issue: G
3 Mechanical Installation
WARNING
Digistart D3 models D3-0145-B to D3-1600-N weigh in excess of 15 kg (33 lb). Use appropriate
safeguards when lifting these models.
WARNING
Models D3-0145-B to D3-1000-B and D3-0255-N to D3-1600-N are intended to be mounted in an
enclosure which prevents access except by trained and authorised personnel, and which prevents the
ingress of contamination. The comp
lete range is designed for use in an environment classified as Pollution
Degree 3 in accordance with IEC60664-1. This means conductive pollution or dry, non-conductive
pollution which becomes conductive due to condensation is acceptable.
It is the installer's responsibility to ensure that any enclosure which allows access to models D3-0145-B to
D3-1000-B and D3-0255-N to D3-1600-N while the product is energized, provides protection against
contact and ingress requirements of IP20.
Models D3-0145-B to D3-1000-B can be installed with optional finger guards, in which case they do not
need to be mounted in an enclosure.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nidec Digistart D3 and is the answer not in the manual?

Nidec Digistart D3 Specifications

General IconGeneral
BrandNidec
ModelDigistart D3
CategoryController
LanguageEnglish

Related product manuals