I
Step3
Charge the Battery
3.1
Prepare
the
included charging
AC
adapter.
If
a plug adapter*
is
included
with
your camera, attach
the plug adapter
to
the
plug on the charging
AC
adapter.
Push
the plug adapter firmly until
it
is
securely held in
place. Once
the
two
are
connected,
attempting
to
forcibly remove
the
plug adapter could damage the
product.
* The shape
of
the
plug adapter varies according
to
the
country
or region in
which
the
camera was purchased.
This
step
can
be
omitted
if
the
plug
adapter
comes
permanently
bonded
to
the charging
AC
adapter.
3.2
Make
sure
the battery
is
inserted
in
the
camera,
and
then connect
the
camera
to the charging
AC
adapter
in
order
of
CD
to@.
• Keep the camera turned off.
• Make
sure
that the plugs
are
properly oriented. Do
not
insert or remove
the plugs at
an
angle when connecting or disconnecting them.
~
Notes
Do
not
use
a
USB
cable
other
than the
UC
-E21.
Using a
USB
cable
other
than the
UC-E21
could result in overheating, fire or electric shock.
Electrical
outlet
USB
cable (included)
• The charge lamp slowly flashes green
to
indicate
that
the
battery
is
charging.
• When charging
is
complete, the charge lamp stops flashing green
and turns off.
About
1
hour
and
50
minutes
are
required
to
charge a
fully exhausted battery.
~
First
Steps
To Next Page
Loading...
