X
10
The Power Switch
Rotate the power switch as shown to turn the camera
on.
Rotate the power switch as shown to turn the camera
off.
The role of the Fn (E) button can be selected using the
Buttons >
E/Fn button option in the setup menu
(0 134), allowing the following settings to be
adjusted by pressing the Fn (E) button and rotating
the command dial:
+
Fn (E) button Command dial
Release mode (0 53) White balance (0 80)
Image quality and size (0 50) Active D-Lighting (0 64)
ISO sensitivity (0 62) Set framing grid (0 132)
Viewfinder
To Next Page
Loading...
