1010
Problems and Solutions
●
The Image Dust Off option in Capture NX-D does not have desired
effect:
Image sensor cleaning changes the position of dust on the low-pass
filter and will not have the desired effect if:
•
Dust off reference data recorded after image sensor cleaning is
performed are used with photographs taken before image sensor
cleaning is performed
•
Dust off reference data recorded before image sensor cleaning is
performed are used with photographs taken after image sensor
cleaning is performed
●
The effects of [Set Picture Control], [Active D-Lighting], or
[Vignette control] are not visible:
In the case of NEF (RAW) images, the effect can only be viewed using
Nikon software. View NEF (RAW) images using Capture NX-D or
ViewNX-i.
●
Pictures cannot be copied to a computer:
Depending on the operating system, you may be unable to upload
pictures when the camera is connected to a computer. Copy pictures
from the memory card to a computer using a card reader or other
device.
To Next Page
Loading...
