Nikon D6 - Inserting the Battery

32
Readying the Camera
Inserting the Battery
Turn the camera off before inserting or removing the battery.
1
Remove the BL-6 battery-
chamber cover.
Lift the battery-chamber cover latch,
turn it to the open (
A
) position (
q
)
and remove the battery-chamber
cover (
w
).
2
Attach the cover to the battery.
•
If the battery release is positioned
so that the arrow (
H
) is visible, slide
the battery release to cover the
arrow (
H
).
•
Insert the two projections on the
battery into the matching slots in
the cover as shown. The battery
release will slide aside to
completely reveal the arrow (
H
).